Frames

Frames is a digitally controlled quad VCA by Mutable Instruments.

Links

Frames Home
Frames Manual

Channel Settings

Interpolation curve	Hold Add for 1 second. Channel knobs control interpolation curves per channel. Options are step, linear, accelerating, decelerating, smooth departure/arrival, and bouncing.
Response curve	Hold Del for 1 second. Channel knobs control response curves per channel, from linear to exponential.

Save/Reset State

Save	Hold Add for 5 seconds. State is saved and will be restored on boot.
Reset	Hold Del for 5 seconds to clear all keyframes.

Operation

Frame knob and CV input smoothly interpolates between keyframes. To play the animation patch an LFO into Frame.

Handshake

Select a frame already containing a keyframe and press Add 5 times to enter/exit sequencer mode.

Operation

Send pulses on the Frame input to cycle output to the next keyframe. Ensure Modulation attenuverter is set to maximum. Frame knob no longer modifies output state.

Handshake

Rotate Frame knob to minimum position and press Del 10 times to enter/exit the mode.

Operation

Enable +10v offset. Outputs are now wavetable oscillators.

Frame knob and CV control pitch.

Channel 1 knob controls wavetable position.

Channel 2 knob offsets wavetable position of each oscillator. At 12 o'clock all oscillators have same wave shape.

Channel 3: After 12 o'clock creates phase shift between oscillators. Before 12 o'clock changes frequency between oscillators.

Channel 4 knob adds phase-modulation between neighbouring oscillators. Before 12 o'clock to modulate from previous channel, after 12 o'clock to modulate from next channel.